Texas Instruments TLE2072ID

Lifecycle Status

ACTIVE (Last Updated: 4 days ago)

Factory Lead Time

6 Weeks

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

8

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Series

Excalibur™

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Terminal Finish

Nickel/Palladium/Gold (Ni/Pd/Au)

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

2

Supply Voltage

5V

Base Part Number

TLE2072

Pin Count

a count of all of the component leads (or pins)

8

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

19V

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

+-5/+-15V

Number of Channels

2

Operating Supply Current

3.1mA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

3.9mA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

48mA

Slew Rate

the maximum rate of output voltage change per unit time.

45V/μs

Architecture

VOLTAGE-FEEDBACK

Amplifier Type

J-FET

Common Mode Rejection Ratio

70 dB

Current - Input Bias

20pA

Voltage - Supply, Single/Dual (±)

4.5V~38V ±2.25V~19V

Output Current per Channel

48mA

Input Offset Voltage (Vos)

6mV

Gain Bandwidth Product

The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.

10MHz

Neg Supply Voltage-Nom (Vsup)

-5V

Unity Gain BW-Nom

9400 kHz

Voltage Gain

106dB

Average Bias Current-Max (IIB)

0.01μA

Low-Offset

NO

Frequency Compensation

Frequency compensation is implemented by modifying the gain and phase characteristics of the amplifier's open loop output or of its feedback network, or both, in such a way as to avoid the conditions leading to oscillation. This is usually done by the internal or external use of resistance-capacitance networks.

YES

Voltage - Input Offset

1.1mV

Low-Bias

YES

Micropower

the use of very small electric generators and prime movers or devices to convert heat or motion to electricity, for use close to the generator.

NO

Bias Current-Max (IIB) @25C

0.000175μA

Programmable Power

A programmable power supply provides remote control capability of the output voltage(s) via an analog control signal controlled by keypad or rotary switch from the front panel of the power supply or via a computer interface such as RS232, GPIB, or USB.

NO

Dual Supply Voltage

9V

Nominal Gain Bandwidth Product

9.4MHz

Max I/O Voltage

6mV

Power

NO

Input Offset Current-Max (IIO)

0.0001μA

Height

1.75mm

Length

4.9mm

Width

3.91mm

Thickness

1.58mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free