TPS2044BD
16-SOIC (0.154, 3.90mm Width)
7606264-TPS2044BD
TEXAS INSTRUMENTS TPS2044BD Power Distribution Switch, Current Limited, High Side, Active Low, 4 Outputs, 5.5V, 1A, SOIC-16
having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.
The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.
Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.
Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.
Any Feature, including a modified Existing Feature, that is not an Existing Feature.
The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.
Occurring at or forming the end of a series, succession, or the like; closing; concluding.
The center distance from one pole to the next.
a count of all of the component leads (or pins)
The maximum current that can be supplied to the load.
the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.
The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.
The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.
Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.
The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.
Protection against electric shock under. single fault conditions.
Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.
RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.
TPS2044BD-Texas-Instruments-datasheet-149034.pdf
TPS2044BD-Texas-Instruments-datasheet-37129547.pdf
TPS2044BD-Texas-Instruments-datasheet-66617633.pdf
TPS2044BD-Texas-Instruments-datasheet-114580.pdf
TPS2044BD-Texas-Instruments-datasheet-124603.pdf
TPS2044BD-Texas-Instruments-datasheet-8199453.pdf