Texas Instruments TPS2557DRBT

Lifecycle Status

ACTIVE (Last Updated: 4 days ago)

Factory Lead Time

6 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-VDFN Exposed Pad

Number of Pins

8

Weight

24.012046mg

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

6 ms

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

2 (1 Year)

Number of Terminations

8

Termination

SMD/SMT

ECCN Code

EAR99

Resistance

22mOhm

Power Rating

2.403W

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

2.403W

Terminal Position

DUAL

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

5V

Terminal Pitch

The center distance from one pole to the next.

0.65mm

Base Part Number

TPS2557

Pin Count

a count of all of the component leads (or pins)

8

Number of Outputs

1

Output Type

N-Channel

Max Output Current

The maximum current that can be supplied to the load.

5A

Number of Channels

1

Voltage

6.5V

Interface

On/Off

Analog IC - Other Type

POWER SUPPLY SUPPORT CIRCUIT

Current

5A

Output Configuration

High Side

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

2.4W

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

5A

Voltage - Supply (Vcc/Vdd)

Not Required

Adjustable Threshold

YES

Input Type

Non-Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

9 ms

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

General Purpose

Min Input Voltage

2.5V

Max Input Voltage

6.5V

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

6.5V

Ratio - Input:Output

1:1

Voltage - Load

2.5V~6.5V

Fault Protection

Protection against electric shock under. single fault conditions.

Current Limiting (Adjustable), Over Temperature, UVLO

Rds On (Typ)

22m Ω

Features

Slew Rate Controlled, Status Flag

Height

1mm

Length

3mm

Width

3mm

Thickness

880μm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free