Toshiba Semiconductor and Storage TLP152(TPL,E

Factory Lead Time

12 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

6-SOIC (0.179, 4.55mm Width), 5 Leads

Number of Pins

5

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~100°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2012

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

260mW

Reach Compliance Code

unknown

Voltage - Isolation

3750Vrms

Max Output Current

The maximum current that can be supplied to the load.

2.5A

Number of Channels

1

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

2.5A

Voltage - Forward (Vf) (Typ)

1.57V

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

165 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

190 ns

Forward Current

Current which flows upon application of forward voltage.

10mA

Direction

Unidirectional

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

18ns

Fall Time (Typ)

22 ns

Rise / Fall Time (Typ)

18ns 22ns

Current - DC Forward (If) (Max)

20mA

Propagation Delay tpLH / tpHL (Max)

145ns, 165ns

Common Mode Transient Immunity (Min)

20kV/μs

Pulse Width Distortion (PWD)

50 ns

Voltage - Output Supply

10V~30V

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant