Vishay Semiconductor Diodes Division FB180SA10

Mount

Chassis Mount, Screw

Mounting Type

Chassis Mount

Package / Case

SOT-227-4, miniBLOC

Number of Pins

4

Supplier Device Package

SOT-227

Current - Continuous Drain (Id) @ 25℃

180A Tc

Drive Voltage (Max Rds On, Min Rds On)

10V

Power Dissipation (Max)

480W Tc

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

181 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Series

HEXFET®

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

150°C

Min Operating Temperature

-55°C

Voltage - Rated DC

100V

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

180A

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

45 ns

FET Type

N-Channel

Rds On (Max) @ Id, Vgs

6.5mOhm @ 108A, 10V

Vgs(th) (Max) @ Id

4V @ 250μA

Input Capacitance (Ciss) (Max) @ Vds

10700pF @ 25V

Gate Charge (Qg) (Max) @ Vgs

380nC @ 10V

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

351ns

Drain to Source Voltage (Vdss)

100V

Vgs (Max)

±20V

Continuous Drain Current (ID)

180A

Gate to Source Voltage (Vgs)

20V

Input Capacitance

The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

10.7nF

Drain to Source Resistance

6.5mOhm

Rds On Max

6.5 mΩ

Height

12.3mm

Length

38.3mm

Width

25.7mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

Non-RoHS Compliant

Lead Free

Contains Lead