Vishay Siliconix DG535DJ

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

28-DIP (0.600, 15.24mm)

Number of Pins

28

Weight

4.190003g

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

150 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2009

JESD-609 Code

e0

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

28

Resistance

90Ohm

Terminal Finish

Tin/Lead (Sn/Pb)

Applications

Video

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

625mW

Terminal Position

DUAL

Number of Functions

1

Supply Voltage

15V

Terminal Pitch

The center distance from one pole to the next.

2.54mm

Pin Count

a count of all of the component leads (or pins)

28

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

15V

Number of Channels

1

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

16.5V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

10V

Operating Supply Current

5μA

Max Supply Current

50μA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

300 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

300 ns

Logic Function

Multiplexer

Supply Type

Single

Bandwidth

500MHz

On-State Resistance (Max)

90Ohm

Multiplexer/Demultiplexer Circuit

16:1

Switching

BREAK-BEFORE-MAKE

Voltage - Supply, Single (V+)

10V~16.5V

Signal Current-Max

0.02A

Features

T-Switch Configuration

Height

3.31mm

Length

39.7mm

Width

14.73mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

Non-RoHS Compliant