Vishay Siliconix DG538ADN

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

28-LCC (J-Lead)

Number of Pins

28

Supplier Device Package

28-PLCC (11.51x11.51)

Weight

1.182714g

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

175 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2009

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Resistance

90Ohm

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85°C

Min Operating Temperature

-40°C

Applications

Ultrasound, Video

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

450mW

Number of Outputs

2

Number of Channels

2

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

18V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

10V

Operating Supply Current

600μA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

450mW

Max Supply Current

2mA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

300 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

300 ns

Logic Function

Multiplexer

Number of Inputs

8

Supply Type

Dual, Single

Bandwidth

500MHz

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

15V

-3db Bandwidth

500MHz

On-State Resistance (Max)

90Ohm

Min Dual Supply Voltage

10V

Dual Supply Voltage

12V

Multiplexer/Demultiplexer Circuit

4:1

Voltage - Supply, Single (V+)

10V~21V

Drain to Source Resistance

90Ohm

Features

T-Switch Configuration

Height

3.69mm

Length

12.57mm

Width

12.57mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

Non-RoHS Compliant