Analog Devices Inc. AD8465WBCPZ-R7

Lifecycle Status

PRODUCTION (Last Updated: 2 weeks ago)

Factory Lead Time

8 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mounting Type

Surface Mount

Package / Case

12-WFQFN Exposed Pad, CSP

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

12

Number of Elements

1

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

Automotive

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

12

ECCN Code

EAR99

Type

with Latch

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

42mW

Terminal Position

QUAD

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

NO LEAD

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

2.5V

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

AD8465

Pin Count

a count of all of the component leads (or pins)

12

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Output Type

Complementary, LVDS, Rail-to-Rail

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

3/5V

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

42mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

50mA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

3 ns

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

3mA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

1.6 ns

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

1.6 ns

Common Mode Rejection Ratio

50 dB

Voltage - Supply, Single/Dual (±)

2.5V~5.5V

Output Current per Channel

50mA

Input Offset Voltage (Vos)

2mV

Voltage Gain

62dB

Power Supply Rejection Ratio (PSRR)

60dB

Supply Voltage Limit-Max

6V

Max Input Current

5μA

Input Bias Current

5μA

Current - Quiescent (Max)

3mA

Voltage - Input Offset (Max)

2mV @ 2.5V

Current - Input Bias (Max)

5μA @ 2.5V

Hysteresis

100μV

CMRR, PSRR (Typ)

50dB CMRR, 60dB PSRR

Length

3mm

Width

3mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead