Analog Devices Inc. ADG201HSJPZ

Lifecycle Status

PRODUCTION (Last Updated: 3 months ago)

Factory Lead Time

8 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

20-LCC (J-Lead)

Number of Pins

20

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

50 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

20

ECCN Code

EAR99

Resistance

50Ohm

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

470mW

Terminal Position

QUAD

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

J BEND

Peak Reflow Temperature (Cel)

260

Number of Functions

4

Supply Voltage

15V

Terminal Pitch

The center distance from one pole to the next.

1.27mm

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

ADG201

Pin Count

a count of all of the component leads (or pins)

20

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Polarity

Non-Inverting

Number of Channels

4

Interface

Parallel

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

16.5V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

10.8V

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

240mW

Max Supply Current

10mA

Throw Configuration

SPST

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

50 ns

Voltage - Supply, Single/Dual (±)

10.8V~16.5V ±13.5V~16.5V

Supply Type

Dual, Single

Neg Supply Voltage-Nom (Vsup)

-15V

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

16.5V

On-State Resistance (Max)

50Ohm

Min Dual Supply Voltage

10.8V

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

20mA

Dual Supply Voltage

15V

Multiplexer/Demultiplexer Circuit

1:1

Off-state Isolation-Nom

72 dB

Current - Leakage (IS(off)) (Max)

1nA

Channel Capacitance (CS(off), CD(off))

10pF 10pF

On-state Resistance Match-Nom

3Ohm

Switch Circuit

establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

SPST - NC

Switch Time (Ton, Toff) (Max)

75ns, 75ns

Charge Injection

A Charge injection in analog switches and multiplexers is a level change caused by stray capacitance associated with the NMOS and PMOS transistors that make up the analog switch.

10pC

Channel-to-Channel Matching (ΔRon)

1.5 Ω

Switch-on Time-Max

75ns

Switch-off Time-Max

75ns

Drain to Source Resistance

50Ohm

Height

3.68mm

Length

9.04mm

Width

9.04mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead