Analog Devices Inc. ADG211AKNZ

Lifecycle Status

PRODUCTION (Last Updated: 4 weeks ago)

Factory Lead Time

8 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mounting Type

Through Hole

Package / Case

16-DIP (0.300, 7.62mm)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

NO

Number of Pins

16

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

450 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

16

ECCN Code

EAR99

Resistance

115Ohm

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

470mW

Number of Functions

4

Supply Voltage

15V

Base Part Number

ADG211

Pin Count

a count of all of the component leads (or pins)

16

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

5V

Polarity

Non-Inverting

Number of Channels

4

Interface

Parallel

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

25V

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

22.5mW

Max Supply Current

1mA

Throw Configuration

SPST

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

600 ns

Supply Type

Dual

Neg Supply Voltage-Nom (Vsup)

-15V

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

22V

On-State Resistance (Max)

115Ohm

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

30mA

Dual Supply Voltage

15V

Multiplexer/Demultiplexer Circuit

1:1

Off-state Isolation-Nom

80 dB

Current - Leakage (IS(off)) (Max)

5nA

Channel Capacitance (CS(off), CD(off))

5pF 5pF

On-state Resistance Match-Nom

5.8Ohm

Switch Circuit

establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

SPST - NC

Switch Time (Ton, Toff) (Max)

600ns, 450ns

Charge Injection

A Charge injection in analog switches and multiplexers is a level change caused by stray capacitance associated with the NMOS and PMOS transistors that make up the analog switch.

20pC

Channel-to-Channel Matching (ΔRon)

5.75 Ω

Switching

BREAK-BEFORE-MAKE

Drain to Source Resistance

115mOhm

Normal Position

NC

Voltage - Supply, Dual (V±)

±15V

Height

3.3mm

Length

20.07mm

Width

6.35mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead