Analog Devices Inc. ADG212AKPZ

Lifecycle Status

PRODUCTION (Last Updated: 1 week ago)

Factory Lead Time

8 Weeks

Mount

Surface Mount, Through Hole

Mounting Type

Surface Mount

Package / Case

20-LCC (J-Lead)

Number of Pins

20

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

450 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

20

ECCN Code

EAR99

Resistance

115Ohm

Terminal Finish

Matte Tin (Sn)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

470mW

Terminal Position

QUAD

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

J BEND

Peak Reflow Temperature (Cel)

260

Number of Functions

4

Supply Voltage

15V

Terminal Pitch

The center distance from one pole to the next.

1.27mm

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

ADG212

Output

SEPARATE OUTPUT

Pin Count

a count of all of the component leads (or pins)

20

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

5V

Number of Channels

4

Interface

Parallel

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

25V

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

22.5mW

Max Supply Current

1mA

Throw Configuration

SPST

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

600 ns

Supply Type

Dual

Neg Supply Voltage-Nom (Vsup)

-15V

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

22V

On-State Resistance (Max)

115Ohm

Dual Supply Voltage

15V

Multiplexer/Demultiplexer Circuit

1:1

Off-state Isolation-Nom

80 dB

Current - Leakage (IS(off)) (Max)

5nA

Channel Capacitance (CS(off), CD(off))

5pF 5pF

Switch Circuit

establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

SPST - NO

Switch Time (Ton, Toff) (Max)

600ns, 450ns

Charge Injection

A Charge injection in analog switches and multiplexers is a level change caused by stray capacitance associated with the NMOS and PMOS transistors that make up the analog switch.

20pC

Channel-to-Channel Matching (ΔRon)

5.75 Ω

Switching

BREAK-BEFORE-MAKE

Drain to Source Resistance

175Ohm

Normal Position

NO

Voltage - Supply, Dual (V±)

±15V

Height

4.53mm

Length

8.89mm

Width

8.89mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead