Diodes Incorporated DMG1012T-7

Factory Lead Time

14 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

SOT-523

Number of Pins

3

Supplier Device Package

SOT-523

Weight

2.012816mg

Current - Continuous Drain (Id) @ 25℃

630mA Ta

Drive Voltage (Max Rds On, Min Rds On)

1.8V 4.5V

Number of Elements

1

Power Dissipation (Max)

280mW Ta

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

26.7 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2012

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Resistance

400MOhm

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

150°C

Min Operating Temperature

-55°C

Number of Channels

1

Element Configuration

The distribution of electrons of an atom or molecule (or other physical structure) in atomic or molecular orbitals.

Single

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

280mW

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

5.1 ns

FET Type

N-Channel

Rds On (Max) @ Id, Vgs

400mOhm @ 600mA, 4.5V

Vgs(th) (Max) @ Id

1V @ 250μA

Input Capacitance (Ciss) (Max) @ Vds

60.67pF @ 16V

Gate Charge (Qg) (Max) @ Vgs

0.74nC @ 4.5V

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

7.4ns

Drain to Source Voltage (Vdss)

20V

Vgs (Max)

±6V

Fall Time (Typ)

12.3 ns

Continuous Drain Current (ID)

630mA

Threshold Voltage

1V

Gate to Source Voltage (Vgs)

6V

Drain to Source Breakdown Voltage

20V

Input Capacitance

The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

60.67pF

Drain to Source Resistance

300mOhm

Rds On Max

400 mΩ

Height

800μm

Length

1.7mm

Width

850μm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free