Diodes Incorporated ZXMP10A13FTA

Factory Lead Time

17 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

TO-236-3, SC-59, SOT-23-3

Number of Pins

3

Weight

7.994566mg

Transistor Element Material

SILICON

Manufacturer Package Identifier

ZXMP10A13FTA

Current - Continuous Drain (Id) @ 25℃

600mA Ta

Drive Voltage (Max Rds On, Min Rds On)

6V 10V

Number of Elements

1

Power Dissipation (Max)

625mW Ta

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

5.9 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2006

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

3

ECCN Code

EAR99

Resistance

1Ohm

Terminal Finish

Matte Tin (Sn)

Voltage - Rated DC

-100V

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

-500mA

Time@Peak Reflow Temperature-Max (s)

40

Pin Count

a count of all of the component leads (or pins)

3

Number of Channels

1

Element Configuration

The distribution of electrons of an atom or molecule (or other physical structure) in atomic or molecular orbitals.

Single

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

ENHANCEMENT MODE

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

625mW

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

1.6 ns

FET Type

P-Channel

Transistor Application

SWITCHING

Rds On (Max) @ Id, Vgs

1 Ω @ 600mA, 10V

Vgs(th) (Max) @ Id

4V @ 250μA

Input Capacitance (Ciss) (Max) @ Vds

141pF @ 50V

Gate Charge (Qg) (Max) @ Vgs

3.5nC @ 10V

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

2.1ns

Drain to Source Voltage (Vdss)

100V

Vgs (Max)

±20V

Fall Time (Typ)

3.3 ns

Continuous Drain Current (ID)

-700mA

Threshold Voltage

-4V

Gate to Source Voltage (Vgs)

20V

Drain Current-Max (Abs) (ID)

0.7A

Drain to Source Breakdown Voltage

-100V

Height

1.02mm

Length

3.04mm

Width

1.4mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free