Infineon Technologies BSP76E6433HUMA1

Factory Lead Time

18 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

TO-261-4, TO-261AA

Number of Pins

4

Manufacturer Package Identifier

PG-SOT223-4

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

HITFET®

Published

2003

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

4

ECCN Code

EAR99

Terminal Finish

Tin (Sn)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

3.8W

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

12V

Terminal Pitch

The center distance from one pole to the next.

2.3mm

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

BSP76

Pin Count

a count of all of the component leads (or pins)

4

Number of Outputs

1

Output Voltage

42V

Output Type

N-Channel

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

42V

Voltage

42V

Interface

On/Off

Current

14A

Output Configuration

Low Side

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

3.8W

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

1.8A

Voltage - Supply (Vcc/Vdd)

Not Required

Input Type

Non-Inverting

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

General Purpose

Halogen Free

Not Halogen Free

Drain to Source Voltage (Vdss)

42V

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

42V

Continuous Drain Current (ID)

1.4A

Ratio - Input:Output

1:1

Voltage - Load

42V Max

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

42V

Fault Protection

Protection against electric shock under. single fault conditions.

Current Limiting (Fixed), Over Temperature, Over Voltage

Output Peak Current Limit-Nom

1.8A

Rds On (Typ)

150m Ω

Max Junction Temperature (Tj)

150°C

Built-in Protections

TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL

Rds On Max

200 mΩ

Features

Auto Restart

On-State Resistance

200mOhm

Height

1.7mm

Length

6.5mm

Width

3.5mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free