Infineon Technologies BTS409L1E3062ABUMA1

Factory Lead Time

18 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

TO-263-5, D2Pak (4 Leads + Tab), TO-263BB

Number of Pins

5

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

200 μs

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

PROFET®

Published

2013

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

6

ECCN Code

EAR99

Terminal Finish

Tin (Sn)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

18W

Terminal Position

SINGLE

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

NOT SPECIFIED

Number of Functions

1

Supply Voltage

12V

Reach Compliance Code

not_compliant

Time@Peak Reflow Temperature-Max (s)

NOT SPECIFIED

JESD-30 Code

R-PSSO-G6

Output Type

N-Channel

Supply Voltage-Max (Vsup)

34V

Supply Voltage-Min (Vsup)

5V

Interface

On/Off

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

1.8mA

Output Configuration

High Side

Voltage - Supply (Vcc/Vdd)

Not Required

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

200 μs

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

General Purpose

Halogen Free

Not Halogen Free

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

43V

Ratio - Input:Output

1:1

Voltage - Load

5V~34V

Fault Protection

Protection against electric shock under. single fault conditions.

Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO

Number of Drivers

1

Turn On Time

The time that it takes a gate circuit to allow a current to reach its full value.

400 μs

Output Peak Current Limit-Nom

7.5A

Rds On (Typ)

160m Ω

Max Junction Temperature (Tj)

150°C

Turn Off Time

400 μs

Built-in Protections

TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE

Output Current Flow Direction

SOURCE

Features

Auto Restart

Height

4.7mm

Length

9.9mm

Width

9.2mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

Non-RoHS Compliant

Lead Free

Contains Lead