ON Semiconductor DF06S

Lifecycle Status

ACTIVE (Last Updated: 1 day ago)

Factory Lead Time

13 Weeks

Mount

Through Hole

Mounting Type

Surface Mount

Package / Case

4-SMD, Gull Wing

Number of Pins

4

Supplier Device Package

4-SDIP

Weight

484mg

Breakdown Voltage / V

600V

Number of Elements

1

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

100V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2015

Tolerance

5%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Termination

SMD/SMT

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

150°C

Min Operating Temperature

-55°C

Capacitance

25pF

Voltage - Rated DC

600V

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

3.1W

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

1.5A

Base Part Number

DF06

Case Code (Metric)

1608

Case Code (Imperial)

0603

Element Configuration

The distribution of electrons of an atom or molecule (or other physical structure) in atomic or molecular orbitals.

Single

Diode Type

Single Phase

Current - Reverse Leakage @ Vr

5μA @ 600V

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

3.1W

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

1.5A

Voltage - Forward (Vf) (Max) @ If

1.1V @ 1.5A

Forward Current

Current which flows upon application of forward voltage.

1.5A

Max Reverse Leakage Current

50μA

Max Surge Current

Surge current is a peak non repetitive current. Maximum (peak or surge) forward current = IFSM or if(surge), the maximum peak amount of current the diode is able to conduct in forward bias mode.

50A

Current - Average Rectified (Io)

1.5A

Forward Voltage

the amount of voltage needed to get current to flow across a diode.

1.1V

Average Rectified Current

Mainly used to characterize alternating voltage and current. It can be computed by averaging the absolute value of a waveform over one full period of the waveform.

1.5A

Peak Reverse Current

The maximum voltage that a diode can withstand in the reverse direction without breaking down or avalanching.If this voltage is exceeded the diode may be destroyed. Diodes must have a peak inverse voltage rating that is higher than the maximum voltage that will be applied to them in a given application.

5μA

Max Repetitive Reverse Voltage (Vrrm)

600V

Peak Non-Repetitive Surge Current

50A

Reverse Voltage

the voltage drop across the diode if the voltage at the cathode is more positive than the voltage at the anode

600V

Max Forward Surge Current (Ifsm)

50A

Voltage - Peak Reverse (Max)

600V

Max Junction Temperature (Tj)

150°C

Height

2.93mm

Length

1.6002mm

Width

6.5mm

Thickness

889μm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free