Vishay Siliconix DG542DJ-E3

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

16-DIP (0.300, 7.62mm)

Number of Pins

16

Weight

1.627801g

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

60 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2000

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

16

Resistance

60Ohm

Terminal Finish

Matte Tin (Sn)

Applications

Video

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

470mW

Peak Reflow Temperature (Cel)

NOT SPECIFIED

Number of Functions

4

Supply Voltage

15V

Time@Peak Reflow Temperature-Max (s)

NOT SPECIFIED

Base Part Number

DG542

Output

SEPARATE OUTPUT

Pin Count

a count of all of the component leads (or pins)

16

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Number of Channels

4

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

15V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

-3V

Operating Supply Current

3.5mA

Max Supply Current

6mA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

100 ns

Voltage - Supply, Single/Dual (±)

3V~15V ±3V~15V

Supply Type

Dual, Single

Bandwidth

500MHz

Neg Supply Voltage-Nom (Vsup)

-3V

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

15V

On-State Resistance (Max)

60Ohm

Min Dual Supply Voltage

10V

Multiplexer/Demultiplexer Circuit

1:1

Off-state Isolation-Nom

75 dB

On-state Resistance Match-Nom

2Ohm

Switch Circuit

establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

SPST

Switching

BREAK-BEFORE-MAKE

Switch-off Time-Max

85ns

Drain to Source Resistance

60Ohm

Normal Position

NO/NC

Features

RGB, T-Switch Configuration

Height

3.81mm

Length

21.33mm

Width

7.11mm

REACH SVHC

Unknown

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant