Vishay Siliconix IRFP350PBF

Factory Lead Time

8 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

TO-247-3

Number of Pins

3

Supplier Device Package

TO-247-3

Weight

38.000013g

Current - Continuous Drain (Id) @ 25℃

16A Tc

Drive Voltage (Max Rds On, Min Rds On)

10V

Number of Elements

1

Power Dissipation (Max)

190W Tc

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

87 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2011

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Resistance

300mOhm

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

150°C

Min Operating Temperature

-55°C

Voltage - Rated DC

400V

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

16A

Number of Channels

1

Voltage

400V

Element Configuration

The distribution of electrons of an atom or molecule (or other physical structure) in atomic or molecular orbitals.

Single

Current

16A

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

190W

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

16 ns

FET Type

N-Channel

Rds On (Max) @ Id, Vgs

300mOhm @ 9.6A, 10V

Vgs(th) (Max) @ Id

4V @ 250μA

Input Capacitance (Ciss) (Max) @ Vds

2600pF @ 25V

Gate Charge (Qg) (Max) @ Vgs

150nC @ 10V

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

49ns

Drain to Source Voltage (Vdss)

400V

Vgs (Max)

±20V

Fall Time (Typ)

47 ns

Continuous Drain Current (ID)

16A

Threshold Voltage

4V

Gate to Source Voltage (Vgs)

20V

Drain to Source Breakdown Voltage

400V

Input Capacitance

The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

2.6nF

Recovery Time

570 ns

Drain to Source Resistance

300mOhm

Rds On Max

300 mΩ

Nominal Vgs

2 V

Height

20.7mm

Length

15.87mm

Width

5.31mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free