Analog Devices Inc. AD8066ARZ-R7

Lifecycle Status

PRODUCTION (Last Updated: 3 weeks ago)

Factory Lead Time

8 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

8

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

FastFET™

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

2

Supply Voltage

5V

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

AD8066

Pin Count

a count of all of the component leads (or pins)

8

Output Type

Rail-to-Rail

Number of Channels

2

Operating Supply Current

14.8mA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

14.8mA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

35mA

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

7.4mA

Slew Rate

the maximum rate of output voltage change per unit time.

180V/μs

Amplifier Type

Voltage Feedback

Common Mode Rejection Ratio

100 dB

Current - Input Bias

3pA

Voltage - Supply, Single/Dual (±)

5V~24V ±2.5V~12V

Output Current per Channel

30mA

Input Offset Voltage (Vos)

1.5mV

Gain Bandwidth Product

The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.

60MHz

Neg Supply Voltage-Nom (Vsup)

-5V

Voltage Gain

103dB

Average Bias Current-Max (IIB)

0.000006μA

Power Supply Rejection Ratio (PSRR)

100dB

Low-Offset

NO

Frequency Compensation

Frequency compensation is implemented by modifying the gain and phase characteristics of the amplifier's open loop output or of its feedback network, or both, in such a way as to avoid the conditions leading to oscillation. This is usually done by the internal or external use of resistance-capacitance networks.

NO

Voltage - Input Offset

400μV

Settling Time

In control theory the settling time of a dynamical system such as an amplifier or other output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band.

55 ns

Low-Bias

YES

-3db Bandwidth

145MHz

Bias Current-Max (IIB) @25C

0.000006μA

Dual Supply Voltage

9V

Input Capacitance

The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

2.1pF

Length

4.9mm

Height Seated (Max)

1.75mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead