Analog Devices Inc. OP2177ARZ-REEL7

Lifecycle Status

PRODUCTION (Last Updated: 1 week ago)

Factory Lead Time

8 Weeks

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

8

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Terminal Finish

Matte Tin (Sn)

Packing Method

TAPE AND REEL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

2

Supply Voltage

5V

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

OP2177

Pin Count

a count of all of the component leads (or pins)

8

Number of Channels

2

Operating Supply Current

1mA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

400μA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

10mA

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

500μA

Slew Rate

the maximum rate of output voltage change per unit time.

0.7V/μs

Architecture

VOLTAGE-FEEDBACK

Amplifier Type

General Purpose

Common Mode Rejection Ratio

125 dB

Current - Input Bias

500pA

Max Input Voltage

15V

Voltage - Supply, Single/Dual (±)

5V~36V ±2.5V~18V

Output Current per Channel

10mA

Supply Type

Dual

Input Offset Voltage (Vos)

75μV

Gain Bandwidth Product

The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.

1.3MHz

Neg Supply Voltage-Nom (Vsup)

-5V

Unity Gain BW-Nom

1300 kHz

Voltage Gain

126.02dB

Power Supply Rejection Ratio (PSRR)

125dB

Low-Offset

YES

Frequency Compensation

Frequency compensation is implemented by modifying the gain and phase characteristics of the amplifier's open loop output or of its feedback network, or both, in such a way as to avoid the conditions leading to oscillation. This is usually done by the internal or external use of resistance-capacitance networks.

YES

Voltage - Input Offset

15μV

Low-Bias

NO

Micropower

the use of very small electric generators and prime movers or devices to convert heat or motion to electricity, for use close to the generator.

YES

Programmable Power

A programmable power supply provides remote control capability of the output voltage(s) via an analog control signal controlled by keypad or rotary switch from the front panel of the power supply or via a computer interface such as RS232, GPIB, or USB.

NO

Wideband

NO

Length

4.9mm

Height Seated (Max)

1.75mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead