AD8532ARU-REEL

Analog Devices Inc. AD8532ARU-REEL

Part No:

AD8532ARU-REEL

Manufacturer:

Analog Devices Inc.

Datasheet:

AD8531,32,34

Package:

8-TSSOP (0.173, 4.40mm Width)

AINNX NO:

7911788-AD8532ARU-REEL

Description:

IC OPAMP GP R-R CMOS 3MHZ 8TSSOP

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    8-TSSOP (0.173, 4.40mm Width)
  • Surface Mount

    having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

    YES
  • Number of Pins
    8
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C~85°C
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Cut Tape (CT)
  • JESD-609 Code
    e0
  • Pbfree Code
    no
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Obsolete
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    8
  • ECCN Code
    EAR99
  • Packing Method
    TAPE AND REEL
  • Terminal Position
    DUAL
  • Terminal Form

    Occurring at or forming the end of a series, succession, or the like; closing; concluding.

    GULL WING
  • Peak Reflow Temperature (Cel)
    240
  • Number of Functions
    2
  • Supply Voltage
    3V
  • Terminal Pitch

    The center distance from one pole to the next.

    0.65mm
  • Time@Peak Reflow Temperature-Max (s)
    30
  • Base Part Number
    AD8532
  • Pin Count

    a count of all of the component leads (or pins)

    8
  • Output Type
    Rail-to-Rail
  • Power Supplies

    an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

    3/5V
  • Number of Channels
    2
  • Operating Supply Current
    750μA
  • Quiescent Current

    The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

    1.25mA
  • Supply Current-Max
    3.5mA
  • Slew Rate

    the maximum rate of output voltage change per unit time.

    5V/μs
  • Architecture
    VOLTAGE-FEEDBACK
  • Amplifier Type
    General Purpose
  • Common Mode Rejection Ratio
    47 dB
  • Current - Input Bias
    5pA
  • Voltage - Supply, Single/Dual (±)
    2.7V~6V ±1.35V~3V
  • Output Current per Channel
    250mA
  • Input Offset Voltage (Vos)
    25mV
  • Gain Bandwidth Product

    The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.

    3MHz
  • Unity Gain BW-Nom
    2200 kHz
  • Voltage Gain
    98.06dB
  • Average Bias Current-Max (IIB)
    0.00006μA
  • Power Supply Rejection Ratio (PSRR)
    55dB
  • Low-Offset
    NO
  • Frequency Compensation

    Frequency compensation is implemented by modifying the gain and phase characteristics of the amplifier's open loop output or of its feedback network, or both, in such a way as to avoid the conditions leading to oscillation. This is usually done by the internal or external use of resistance-capacitance networks.

    YES
  • Supply Voltage Limit-Max
    7V
  • Low-Bias
    YES
  • Micropower

    the use of very small electric generators and prime movers or devices to convert heat or motion to electricity, for use close to the generator.

    NO
  • Bias Current-Max (IIB) @25C
    0.00005μA
  • Programmable Power

    A programmable power supply provides remote control capability of the output voltage(s) via an analog control signal controlled by keypad or rotary switch from the front panel of the power supply or via a computer interface such as RS232, GPIB, or USB.

    NO
  • Wideband
    NO
  • Input Voltage Noise Density
    45nV/sqrt Hz
  • Length
    4.4mm
  • Radiation Hardening

    Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

    No
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    Non-RoHS Compliant
  • Lead Free
    Contains Lead
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for Analog Devices Inc. AD8532ARU-REEL.