Analog Devices Inc. AD826AR-REEL7

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Lead, Tin

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

8

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

JESD-609 Code

e0

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Packing Method

TAPE AND REEL

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

240

Number of Functions

2

Supply Voltage

5V

Reach Compliance Code

not_compliant

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

AD826

Pin Count

a count of all of the component leads (or pins)

8

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Number of Channels

2

Operating Supply Current

15mA

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

7.5mA

Slew Rate

the maximum rate of output voltage change per unit time.

350V/μs

Amplifier Type

Voltage Feedback

Common Mode Rejection Ratio

100 dB

Current - Input Bias

3.3μA

Voltage - Supply, Single/Dual (±)

5V~36V ±2.5V~18V

Output Current per Channel

50mA

Input Offset Voltage (Vos)

2mV

Gain Bandwidth Product

The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.

50MHz

Neg Supply Voltage-Nom (Vsup)

-5V

Unity Gain BW-Nom

20000 kHz

Voltage Gain

72.04dB

Average Bias Current-Max (IIB)

6.6μA

Power Supply Rejection Ratio (PSRR)

86dB

Low-Offset

NO

Frequency Compensation

Frequency compensation is implemented by modifying the gain and phase characteristics of the amplifier's open loop output or of its feedback network, or both, in such a way as to avoid the conditions leading to oscillation. This is usually done by the internal or external use of resistance-capacitance networks.

YES

Voltage - Input Offset

500μV

Settling Time

In control theory the settling time of a dynamical system such as an amplifier or other output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band.

70 ns

Low-Bias

NO

Micropower

the use of very small electric generators and prime movers or devices to convert heat or motion to electricity, for use close to the generator.

NO

Bias Current-Max (IIB) @25C

6.6μA

Programmable Power

A programmable power supply provides remote control capability of the output voltage(s) via an analog control signal controlled by keypad or rotary switch from the front panel of the power supply or via a computer interface such as RS232, GPIB, or USB.

NO

Input Capacitance

The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

1.5pF

Wideband

NO

Input Voltage Noise Density

15nV/sqrt Hz

Length

4.9mm

Height Seated (Max)

1.75mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

Non-RoHS Compliant

Lead Free

Contains Lead