Analog Devices Inc. ADG658YRQZ

Lifecycle Status

PRODUCTION (Last Updated: 2 weeks ago)

Factory Lead Time

8 Weeks

Mounting Type

Surface Mount

Package / Case

16-SSOP (0.154, 3.90mm Width)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

16

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

30 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

16

ECCN Code

EAR99

Resistance

75Ohm

Terminal Finish

Matte Tin (Sn)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

10μW

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

5V

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

ADG658

Pin Count

a count of all of the component leads (or pins)

16

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

5V

Number of Channels

8

Interface

Parallel

Number of Circuits

1

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

12V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2V

Analog IC - Other Type

SINGLE-ENDED MULTIPLEXER

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

10μW

Throw Configuration

DPST

Number of Inputs

8

Voltage - Supply, Single/Dual (±)

2V~12V ±2V~6V

Neg Supply Voltage-Nom (Vsup)

-5V

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

6V

On-State Resistance (Max)

75Ohm

Min Dual Supply Voltage

2V

Dual Supply Voltage

5V

Multiplexer/Demultiplexer Circuit

8:1

Off-state Isolation-Nom

90 dB

Current - Leakage (IS(off)) (Max)

200pA

Channel Capacitance (CS(off), CD(off))

4pF 23pF

On-state Resistance Match-Nom

1.3Ohm

Switch Time (Ton, Toff) (Max)

115ns, 45ns

Charge Injection

A Charge injection in analog switches and multiplexers is a level change caused by stray capacitance associated with the NMOS and PMOS transistors that make up the analog switch.

2pC

Channel-to-Channel Matching (ΔRon)

1.3 Ω

Switching

BREAK-BEFORE-MAKE

Switch-off Time-Max

55ns

Drain to Source Resistance

75Ohm

Signal Current-Max

0.02A

Height

1.65mm

Length

5mm

Width

3.91mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead