Analog Devices Inc. ADG707BRUZ-REEL7

Lifecycle Status

PRODUCTION (Last Updated: 2 weeks ago)

Factory Lead Time

8 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mounting Type

Surface Mount

Package / Case

28-TSSOP (0.173, 4.40mm Width)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

28

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

10 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

28

ECCN Code

EAR99

Resistance

4.5Ohm

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

5μW

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

2.5V

Terminal Pitch

The center distance from one pole to the next.

0.65mm

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

ADG707

Pin Count

a count of all of the component leads (or pins)

28

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

5V

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

3/5/+-3V

Number of Channels

8

Interface

Parallel

Number of Circuits

2

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

5.5V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

1.8V

Operating Supply Current

1nA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

5μW

Logic Function

Multiplexer

Number of Inputs

16

Voltage - Supply, Single/Dual (±)

1.8V~5.5V ±2.5V

Supply Type

Dual, Single

Supply Current-Max (Isup)

0.001mA

Neg Supply Voltage-Nom (Vsup)

-2.5V

On-State Resistance (Max)

4.5Ohm

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

30mA

Dual Supply Voltage

2.5V

Multiplexer/Demultiplexer Circuit

8:1

Off-state Isolation-Nom

80 dB

Current - Leakage (IS(off)) (Max)

100pA

Channel Capacitance (CS(off), CD(off))

13pF 90pF

On-state Resistance Match-Nom

0.3Ohm

Switch Time (Ton, Toff) (Max)

32ns, 16ns (Typ)

Charge Injection

A Charge injection in analog switches and multiplexers is a level change caused by stray capacitance associated with the NMOS and PMOS transistors that make up the analog switch.

8pC

Switching

BREAK-BEFORE-MAKE

Switch-on Time-Max

50ns

Signal Current-Max

0.03A

Length

9.7mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead