STMicroelectronics VN340SP-E

Lifecycle Status

ACTIVE (Last Updated: 8 months ago)

Factory Lead Time

12 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

PowerSO-10 Exposed Bottom Pad

Number of Pins

10

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

34 μs

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e3

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

10

ECCN Code

EAR99

Resistance

320mOhm

Terminal Finish

Matte Tin (Sn) - annealed

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Number of Functions

4

Supply Voltage

24V

Terminal Pitch

The center distance from one pole to the next.

1.27mm

Base Part Number

VN340

Pin Count

a count of all of the component leads (or pins)

10

Output Type

N-Channel

Max Output Current

The maximum current that can be supplied to the load.

700mA

Voltage

36V

Interface

On/Off

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

6mA

Current

700mA

Output Configuration

High Side

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

700mA

Voltage - Supply (Vcc/Vdd)

Not Required

Input Type

Non-Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

52 μs

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

General Purpose

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

94μs

Fall Time (Typ)

94 μs

Ratio - Input:Output

1:1

Voltage - Load

10V~36V

Fault Protection

Protection against electric shock under. single fault conditions.

Current Limiting (Fixed), Over Temperature

Number of Drivers

4

Rds On (Typ)

200m Ω (Max)

Turn Off Time

50 µs

Built-in Protections

TRANSIENT; THERMAL; UNDER VOLTAGE

Features

Status Flag

Height

3.7mm

Length

9.5mm

Width

9.6mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free