STMicroelectronics VND14NV04TR-E

Lifecycle Status

ACTIVE (Last Updated: 6 months ago)

Factory Lead Time

20 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

TO-252-3, DPak (2 Leads + Tab), SC-63

Number of Pins

3

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

450 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

OMNIFET II™, VIPower™

JESD-609 Code

e3

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

2

ECCN Code

EAR99

Resistance

35mOhm

Terminal Finish

Matte Tin (Sn) - annealed

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

74W

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Terminal Pitch

The center distance from one pole to the next.

2.25mm

Base Part Number

VND14

Pin Count

a count of all of the component leads (or pins)

3

JESD-30 Code

R-PSSO-G2

Output Type

N-Channel

Max Output Current

The maximum current that can be supplied to the load.

12A

Interface

On/Off

Element Configuration

The distribution of electrons of an atom or molecule (or other physical structure) in atomic or molecular orbitals.

Single

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

100μA

Output Configuration

Low Side

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

74W

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

12A

Voltage - Supply (Vcc/Vdd)

Not Required

Max Supply Current

100μA

Input Type

Non-Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

80 ns

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

General Purpose

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

350ns

Fall Time (Typ)

150 ns

Continuous Drain Current (ID)

12A

Ratio - Input:Output

1:1

Voltage - Load

36V Max

Fault Protection

Protection against electric shock under. single fault conditions.

Current Limiting (Fixed), Over Temperature, Over Voltage

Drain to Source Breakdown Voltage

40V

Number of Drivers

1

Turn On Time

The time that it takes a gate circuit to allow a current to reach its full value.

4.5 μs

Output Peak Current Limit-Nom

18A

Rds On (Typ)

35m Ω (Max)

Drain to Source Resistance

35mOhm

Turn Off Time

25 μs

Built-in Protections

TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL

Height

2.63mm

Length

5.1mm

Width

4.7mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free