VND5160JTR-E

STMicroelectronics VND5160JTR-E

Part No:

VND5160JTR-E

Manufacturer:

STMicroelectronics

Datasheet:

VND5160J-E

Package:

12-PowerLSOP (0.154, 3.90mm Width)

ROHS:

AINNX NO:

7595648-VND5160JTR-E

Description:

IC DRVR HISIDE 2CH POWERSSO12

Products specifications
  • Lifecycle Status
    ACTIVE (Last Updated: 6 months ago)
  • Factory Lead Time
    18 Weeks
  • Contact Plating

    Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

    Tin
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    12-PowerLSOP (0.154, 3.90mm Width)
  • Number of Pins
    12
  • Turn Off Delay Time

    It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

    15 μs
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C~150°C TJ
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Tape & Reel (TR)
  • Series
    VIPower™
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    3 (168 Hours)
  • Number of Terminations
    12
  • ECCN Code
    EAR99
  • Resistance
    160mOhm
  • Terminal Position
    DUAL
  • Terminal Form

    Occurring at or forming the end of a series, succession, or the like; closing; concluding.

    GULL WING
  • Number of Functions
    2
  • Supply Voltage
    13V
  • Terminal Pitch

    The center distance from one pole to the next.

    0.8mm
  • Base Part Number
    VND5160
  • Pin Count

    a count of all of the component leads (or pins)

    12
  • Output Type
    N-Channel
  • Max Output Current

    The maximum current that can be supplied to the load.

    5A
  • Operating Supply Voltage

    The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

    13V
  • Voltage
    36V
  • Interface
    On/Off
  • Nominal Supply Current

    Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

    3mA
  • Current
    5A
  • Output Configuration
    High Side
  • Output Current

    The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

    5A
  • Voltage - Supply (Vcc/Vdd)
    Not Required
  • Input Type
    Non-Inverting
  • Turn On Delay Time

    Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

    10 μs
  • Switch Type

    Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

    General Purpose
  • Output Current per Channel
    3.5A
  • Ratio - Input:Output
    1:1
  • Voltage - Load
    4.5V~36V
  • Fault Protection

    Protection against electric shock under. single fault conditions.

    Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
  • Number of Drivers
    2
  • Rds On (Typ)
    160m Ω (Max)
  • Max Junction Temperature (Tj)
    150°C
  • Built-in Protections
    TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
  • Features
    Auto Restart, Status Flag
  • On-State Resistance
    160mOhm
  • Height
    1.62mm
  • Length
    5mm
  • Width
    4mm
  • Radiation Hardening

    Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

    No
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    ROHS3 Compliant
  • Lead Free
    Lead Free
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for STMicroelectronics VND5160JTR-E.