VNQ5027AKTR-E
24-SOP (0.295, 7.50mm Width) Exposed Pad
7595868-VNQ5027AKTR-E
IC SSR HISIDE QUAD POWERSO24
It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.
The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.
Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.
Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.
Occurring at or forming the end of a series, succession, or the like; closing; concluding.
The center distance from one pole to the next.
a count of all of the component leads (or pins)
The maximum current that can be supplied to the load.
The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.
an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?
Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.
The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.
Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.
Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.
Protection against electric shock under. single fault conditions.
Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.
RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.