Mounting Type
Surface Mount
Package / Case
48-TFSOP (0.724, 18.40mm Width)
Surface Mount
having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.
YES
Supplier Device Package
48-TSOP
Number of Terminals
48
EU RoHS
Compliant
ECCN (US)
3A991b.1.a.
HTS
8542.32.00.71
Automotive
Yes
PPAP
Unknown
Cell Type
SLC NAND
Chip Density (bit)
8G
Block Organization
Symmetrical
Address Bus Width (bit)
31
Number of Bits/Word (bit)
8
Number of Words
1G
Programmability
Yes
Timing Type
Asynchronous
Maximum Erase Time (S)
0.01/Block
Maximum Programming Time (ms)
0.7/Page
Interface Type
Parallel
Minimum Operating Supply Voltage (V)
2.7
Typical Operating Supply Voltage (V)
3|3.3
Maximum Operating Supply Voltage (V)
3.6
Programming Voltage (V)
2.7 to 3.6
Operating Current (mA)
35
Program Current (mA)
35
Minimum Operating Temperature (°C)
-40
Maximum Operating Temperature (°C)
85
Supplier Temperature Grade
Industrial
Command Compatible
No
ECC Support
Yes
Support of Page Mode
Yes
Minimum Endurance (Cycles)
100000
Mounting
Surface Mount
Package Height
1
Package Width
18.4
Package Length
12
PCB changed
48
Standard Package Name
SOP
Supplier Package
TSOP-I
Lead Shape
Gull-wing
Package
Tray
Mfr
Winbond Electronics
Product Status
Active
Memory Types
Non-Volatile
Supply Voltage-Nom (Vsup)
2.7V - 3.6V
Dimensions
18.5 x 12.1 x 1.05mm
Minimum Operating Supply Voltage
2.7 V
Package Type
TSOP
Maximum Operating Temperature
the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.
+85 °C
Minimum Operating Temperature
-40 °C
Maximum Operating Supply Voltage
3.6 V
Package Description
TSOP1,
Package Style
SMALL OUTLINE, THIN PROFILE
Number of Words Code
1000000000
Package Body Material
PLASTIC/EPOXY
Operating Temperature-Min
-40 °C
Reflow Temperature-Max (s)
NOT SPECIFIED
Operating Temperature-Max
85 °C
Rohs Code
Yes
Manufacturer Part Number
W29N08GVSIAA
Package Code
TSOP1
Package Shape
RECTANGULAR
Manufacturer
Winbond Electronics Corp
Part Life Cycle Code
Active
Ihs Manufacturer
WINBOND ELECTRONICS CORP
Risk Rank
2.28
Operating Temperature
The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.
-40°C ~ 85°C (TA)
Series
-
Part Status
Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.
Active
Type
SLC NAND Flash
Technology
FLASH - NAND (SLC)
Voltage - Supply
2.7V ~ 3.6V
Terminal Position
DUAL
Terminal Form
Occurring at or forming the end of a series, succession, or the like; closing; concluding.
GULL WING
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Number of Functions
1
Terminal Pitch
The center distance from one pole to the next.
0.5 mm
Reach Compliance Code
compliant
Pin Count
a count of all of the component leads (or pins)
48
JESD-30 Code
R-PDSO-G48
Supply Voltage-Max (Vsup)
3.6 V
Temperature Grade
Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.
INDUSTRIAL
Supply Voltage-Min (Vsup)
2.7 V
Memory Size
The memory capacity is the amount of data a device can store at any given time in its memory.
8Gbit
Speed
40MHz
Operating Mode
A phase of operation during the operation and maintenance stages of the life cycle of a facility.
ASYNCHRONOUS
Access Time
25 ns
Memory Format
FLASH
Memory Interface
An external memory interface is a bus protocol for communication from an integrated circuit, such as a microprocessor, to an external memory device located on a circuit board.
Parallel
Architecture
Sectored
Organization
High Quality Single Level Cell (SLC) Technology Standard ONFI NAND Command Set
Seated Height-Max
1.2 mm
Memory Width
8
Write Cycle Time - Word, Page
25ns, 700µs
Memory Density
8Gb
Parallel/Serial
PARALLEL
Memory IC Type
FLASH
Programming Voltage
A special high-voltage supply that supplies the potential and energy for altering the state of certain nonvolatile memory arrays. On some devices, the presence of VPP also acts as a program enable signal (P).
3 V
Sector Size
128Kbyte x 8192
Page Size
2Kbyte
Boot Block
No
Temperature
40ºC ~ 85ºC / -40ºC ~ 105ºC
Memory Organization
1G x 8
Width
18.5mm
Height
1.05mm
Length
12.1mm